CAN interface and LIN interface Intelligent boardiPC-I XC16&PMC
友情提示:(1)有问题: 可以点击 右边中-在线咨询，左侧qq，旺旺在线联系
         (2)感兴趣: 可以点击 左侧中-分享到

 

iPC-I XC16/PMC

Intelligent board for 5 V and 3.3 V PMC bus systems with high/low-speed CAN interface and LIN interface


WEEE and RoHS conformCovering a wide range of industrial and automotive CAN applications, this is a powerful and economic solution for an active CAN board with one or two CAN channels. The interface is state-of-the-art, supports PMC and can be easily installed by Plug & Play. Some of the features offered by the on-board microcontroller include filtering, pre-processing, transmission and time-stamped storage of the CAN messages.
Due to the powerful microcontroller, both CAN controllers can operate simultaneously without losing any data even in systems with a high bus load. In combination with the VCI CAN driver, the iPC-I XC16/PMC allows the seamless integration of PC-supported CAN applications.

Technical Data

PC bus interface PMC Bus (V2.2), 32 Bit / 33 MHz, 5 Volt or 3.3 Volt
Memory range Plug & Play, 16 kB memory mapped and 128 bytes I/O area
Interrupts INT A, Plug & Play
Microcontroller Infineon XC161
CAN controller TwinCAN (two CAN channels); CAN 2.0 A/B
CAN bus interface ISO 11898-2 and ISO 11898-3, Sub D9 connector according to CiA 303-1, high-/low-speed bus interface switchable via software
LIN controller TJA1020
LIN bus interface ISO 9141/LIN, Master/Slave mode switchable via software, galvanic isolation
Power supply 5 V DC, 100 mA typ.; 3.3 V DC, 120 mA typ.
Galvanic isolation 1 kV, 1 sec.
Temperature range -20 ºC ... +70 ºC
Certification CE, FCC
Size Approx. 74 x 149 mm single CMC